SeaLogScubapro
How to import dives from a Scubapro Luna 2.0
The Scubapro Luna 2.0 talks Bluetooth LE, so SeaLog downloads it straight to your phone. No cable, no desktop, no manufacturer account.
Download dives from the Scubapro Luna 2.0
- Wake the computer and put it in transfer mode
Charge or wake the Scubapro Luna 2.0 and open its Bluetooth or PC/upload mode. Most models only advertise for a minute or two, so do this last, right before you pair.
Most units only hold this mode for a minute or two, so do it last, right before you connect. - Open the import hub in SeaLog
In SeaLog, tap the plus button, then Import dives, then Dive computer. Allow Bluetooth when iOS asks. SeaLog never asks for a manufacturer account.
- Pick your model and pair
Choose Scubapro Luna 2.0 from the list. If iOS shows a pairing prompt, accept it. Keep the computer in transfer mode until the download finishes.
The unit only advertises for a short window. If it never appears, put it back into transfer mode and try again straight away. - Download the dives
SeaLog pulls every dive still in the computer's memory, with depth profile, water temperature, gas and surface interval, and skips the ones you already have.
- Check and keep
New dives land in your logbook ready to name, place on a site and tag with the species you saw. Nothing was retyped.
A dive log app for the Luna 2.0
Once the dives are in, SeaLog treats them like its own: a scrubbable depth profile, the site pinned on a map, water temperature, gas and tank, buddies, and the photos from your camera roll matched to the minutes you were underwater. Tag the animals you saw and they go into your species life list. It works offline on the boat and syncs when you are back, and your whole logbook exports to UDDF, CSV or PDF whenever you ask, so nothing is locked in here either.
Scubapro’s own software and drivers
Alive and actively maintained on mobile (LogTRAK 2.0 was last updated 1 July 2026, v1.13.1) but frozen on desktop: the legacy Windows/Mac LogTRAK is still downloadable and still notarized, yet has not been rebuilt since December 2022 (1.8.7, Intel-only), and the older SmartTRAK and DataTRAK apps are Windows-only relics.
- Desktop softwareLogTRAK web versionBrowser front end for the same logbook, but it is a mirror of the phone app's account: you sign in and read dives the app uploaded, you cannot pull them off a dive computer here.Browser
- Desktop softwareLegacy LogTRAK desktop for macOS (1.8.7)Downloads as SP_LogTRAK_macos.zip containing SCUBAPRO_LogTRAK_macos_1_8_7.dmg plus a multi-language "Read first" file; this is the only SCUBAPRO software that can talk to the cradle generation.macOS
- Desktop softwareLegacy LogTRAK desktop for Windows (1.8.7)Downloads as SP_LogTRAK_windows.zip containing SCUBAPRO_LogTRAK_windows-x32_1_8_7.exe; the bundled readme sets the floor at Windows 8.Windows
- Mobile appSCUBAPRO LogTRAK 2.0 (iOS)The current mobile logbook, still updated (v1.13.1, July 2026); it downloads dives and also pushes firmware updates over Bluetooth.iOS
- Mobile appSCUBAPRO LogTRAK 2.0 (Android)Same app as the iOS build; needs Bluetooth Low Energy hardware and the dive computer set to BLE-ready mode.Android
- ManualLuna 2.0 user manualConfirms Bluetooth pairing with a randomly generated pin and a three-minute idle timeout on the radio.
- ManualLuna 2.0 AI user manualAir-integrated version of the Luna 2.0.
- Official guideLogTRAK mobile app overview and FAQLanding page for the app with an FAQ section covering pairing failures, deleting dives, backups and importing an old SmartTRAK or desktop LogTRAK logbook.Win + Mac
Every link goes to Scubapro’s own site and was checked before publishing. If one has rotted since, tell us and we will fix it.
Scubapro Luna 2.0: common questions
Why will my Scubapro Luna 2.0 not connect over Bluetooth?
Nine times out of ten the computer has dropped out of transfer mode: it only advertises for a short window, so put it back into Bluetooth or upload mode and try again immediately. After that, check that the battery is not low, that no other app or desktop is already holding the connection, and that Bluetooth permission is granted to SeaLog in iOS Settings. Toggling iOS Bluetooth off and on clears a stale pairing more often than it should.
Do I need LogTRAK as well?
No. SeaLog reads the Scubapro Luna 2.0 itself, so you do not need a manufacturer account or a second app in the middle. If you already have years of dives in LogTRAK, export them to UDDF once and import that file so your history and your new dives live together.
Does the depth profile come across, or just the numbers?
The full profile. SeaLog stores the sample-by-sample depth, temperature and ascent data, draws it as a graph you can scrub, and can export the whole thing back out to UDDF at any time.