SeaLogScubapro
How to import dives from a Scubapro Aladin A2
The Scubapro Aladin A2 talks Bluetooth LE, so SeaLog downloads it straight to your phone. No cable, no desktop, no manufacturer account.
Download dives from the Scubapro Aladin A2
- Wake the computer and put it in transfer mode
Charge or wake the Scubapro Aladin A2 and open its Bluetooth or PC/upload mode. Most models only advertise for a minute or two, so do this last, right before you pair.
Most units only hold this mode for a minute or two, so do it last, right before you connect. - Open the import hub in SeaLog
In SeaLog, tap the plus button, then Import dives, then Dive computer. Allow Bluetooth when iOS asks. SeaLog never asks for a manufacturer account.
- Pick your model and pair
Choose Scubapro Aladin A2 from the list. If iOS shows a pairing prompt, accept it. Keep the computer in transfer mode until the download finishes.
The unit only advertises for a short window. If it never appears, put it back into transfer mode and try again straight away. - Download the dives
SeaLog pulls every dive still in the computer's memory, with depth profile, water temperature, gas and surface interval, and skips the ones you already have.
- Check and keep
New dives land in your logbook ready to name, place on a site and tag with the species you saw. Nothing was retyped.
A dive log app for the Aladin A2
Once the dives are in, SeaLog treats them like its own: a scrubbable depth profile, the site pinned on a map, water temperature, gas and tank, buddies, and the photos from your camera roll matched to the minutes you were underwater. Tag the animals you saw and they go into your species life list. It works offline on the boat and syncs when you are back, and your whole logbook exports to UDDF, CSV or PDF whenever you ask, so nothing is locked in here either.
Scubapro’s own software and drivers
Alive and actively maintained on mobile (LogTRAK 2.0 was last updated 1 July 2026, v1.13.1) but frozen on desktop: the legacy Windows/Mac LogTRAK is still downloadable and still notarized, yet has not been rebuilt since December 2022 (1.8.7, Intel-only), and the older SmartTRAK and DataTRAK apps are Windows-only relics.
- Desktop softwareLogTRAK web versionBrowser front end for the same logbook, but it is a mirror of the phone app's account: you sign in and read dives the app uploaded, you cannot pull them off a dive computer here.Browser
- Desktop softwareLegacy LogTRAK desktop for macOS (1.8.7)Downloads as SP_LogTRAK_macos.zip containing SCUBAPRO_LogTRAK_macos_1_8_7.dmg plus a multi-language "Read first" file; this is the only SCUBAPRO software that can talk to the cradle generation.macOS
- Desktop softwareLegacy LogTRAK desktop for Windows (1.8.7)Downloads as SP_LogTRAK_windows.zip containing SCUBAPRO_LogTRAK_windows-x32_1_8_7.exe; the bundled readme sets the floor at Windows 8.Windows
- Official guideAladin series firmware update from iOSFirmware ships as a .swu file you save on the phone and then push from the app.iOS
- Official guideAladin series firmware update from AndroidAndroid counterpart: the .swu goes in the phone's Downloads folder, then Firmware Upload in the app.Android
- Mobile appSCUBAPRO LogTRAK 2.0 (iOS)The current mobile logbook, still updated (v1.13.1, July 2026); it downloads dives and also pushes firmware updates over Bluetooth.iOS
- Mobile appSCUBAPRO LogTRAK 2.0 (Android)Same app as the iOS build; needs Bluetooth Low Energy hardware and the dive computer set to BLE-ready mode.Android
- FirmwareAladin A2 firmware 1.4 (.swu)Direct firmware image dated November 2021.
Every link goes to Scubapro’s own site and was checked before publishing. If one has rotted since, tell us and we will fix it.
Scubapro Aladin A2: common questions
Why will my Scubapro Aladin A2 not connect over Bluetooth?
Nine times out of ten the computer has dropped out of transfer mode: it only advertises for a short window, so put it back into Bluetooth or upload mode and try again immediately. After that, check that the battery is not low, that no other app or desktop is already holding the connection, and that Bluetooth permission is granted to SeaLog in iOS Settings. Toggling iOS Bluetooth off and on clears a stale pairing more often than it should.
Do I need LogTRAK as well?
No. SeaLog reads the Scubapro Aladin A2 itself, so you do not need a manufacturer account or a second app in the middle. If you already have years of dives in LogTRAK, export them to UDDF once and import that file so your history and your new dives live together.
Does the depth profile come across, or just the numbers?
The full profile. SeaLog stores the sample-by-sample depth, temperature and ascent data, draws it as a graph you can scrub, and can export the whole thing back out to UDDF at any time.