SeaLogUwatec
How to import dives from a Uwatec Galileo Terra
The Uwatec Galileo Terra transfers over infrared adapter only. iOS does not expose that kind of connection to apps, so the dives come across once through a Mac or PC, then live on your phone forever.
Transfer the dives off the Uwatec Galileo Terra
- Install the driver for the cable
The infrared adapter is a USB-to-serial adapter, and its chipset needs a driver before any software can see the Uwatec Galileo Terra. Install the MosChip MCS7780 USB-to-IrDA bridge (USB VID 0x9710 / PID 0x7780). Confirmed by unpacking Scubapro's own IrDA driver package: it installs MosIrUsb.sys via MosUIr64.INF under Windows device class "Infrared". An infrared transceiver, NOT a virtual COM port. This is deliberately different from the later Scubapro Cradle USB (Chromis/Meridian/Mantis/Aladin Square), which is a Silicon Labs CP210x VCP and does not apply to any Uwatec model. driver, then reboot. Skip this and the desktop app will report no device on a cable that is working perfectly.
IrDA driver for Windows 8 to Windows 10, 64-bit
These cables are USB-to-serial. Without the MosChip MCS7780 USB driver the port never appears, and the software reports no device. - Connect the Uwatec Galileo Terra to a Mac or PC
Use the infrared adapter made for the Uwatec Galileo Terra, not a generic charging cable: the data pins differ. Check the o-ring is seated, line the connector up with the notch on the case, and turn it to lock. An iPhone or iPad cannot open this kind of connection at all, so this step has to happen on a computer.
The o-ring must be in place, the nub lines up with the notch, then the head turns a quarter turn to lock. This cable is MosChip MCS7780 USB-to-IrDA bridge (USB VID 0x9710 / PID 0x7780). Confirmed by unpacking Scubapro's own IrDA driver package: it installs MosIrUsb.sys via MosUIr64.INF under Windows device class "Infrared". An infrared transceiver, NOT a virtual COM port. This is deliberately different from the later Scubapro Cradle USB (Chromis/Meridian/Mantis/Aladin Square), which is a Silicon Labs CP210x VCP and does not apply to any Uwatec model.. - Put the computer into PC mode
Switch the Uwatec Galileo Terra into its PC or upload mode before you launch the software, not after. Most desktop apps only look for the unit at startup, so a computer that wakes up late is a computer the software never finds.
Most units only hold this mode for a minute or two, so do it last, right before you connect. - Download the dives with desktop software
Read the computer with LogTRAK or Subsurface. Subsurface is free, open source, runs on macOS, Windows and Linux, and supports this model.
- Export the dives as UDDF
Export the whole logbook to a UDDF file. UDDF is the open dive-log exchange format and keeps the full depth profile, not just the summary numbers.
Export the whole logbook, not the visible page. UDDF keeps the sample-by-sample depth profile, which a summary CSV does not. - Import the file into SeaLog
Get the file to your phone. AirDrop, iCloud Drive or email all work, anything that lands it in the iOS Files app. Then in SeaLog tap the plus button, Import dives, UDDF file, and pick it. Every dive arrives with its profile, and duplicates are skipped.
A dive log app for the Galileo Terra
Once the dives are in, SeaLog treats them like its own: a scrubbable depth profile, the site pinned on a map, water temperature, gas and tank, buddies, and the photos from your camera roll matched to the minutes you were underwater. Tag the animals you saw and they go into your species life list. It works offline on the boat and syncs when you are back, and your whole logbook exports to UDDF, CSV or PDF whenever you ask, so nothing is locked in here either.
Uwatec’s own software and drivers
Uwatec no longer exists as a brand. Johnson Outdoors absorbed it into Scubapro, uwatec.com is a dead parked domain, and while Scubapro still hosts the old SmartTRAK and DataTRAK downloads, the infrared adapter they require is discontinued and none of the 23 Uwatec models can talk to Scubapro's current cloud app at all.
- Desktop softwareSmartTRAK 3.0 (Windows installer)The main Uwatec desktop application, covering the whole infrared generation. Downloads as a ZIP holding a single installer executable dated February 2018; Windows only, no Mac equivalent exists.Windows
- Desktop softwareLegacy LogTRAK desktop for macOSThe only Mac-native option that touches Uwatec hardware, and its infrared support is limited to the Aladin One and Galileo family rather than the full SmartTRAK list. It can also read legacy SmartTRAK data. Baseline is macOS Snow Leopard, so treat infrared on a current Mac as doubtful.macOS
- Desktop softwareLegacy LogTRAK desktop for WindowsVersion 1.8.7, requires Windows 8 or newer. Its bundled readme states the infrared driver serves the Aladin One and Galileo models specifically. Useful mainly to owners who want a more modern interface than SmartTRAK, or who need to import an old SmartTRAK logbook.Windows
- DriverIrDA driver for Windows 8 to Windows 10, 64-bitInstalls the MosChip MCS7780 infrared bridge. Windows 10 usually supplies this automatically, so it is mainly needed on Windows 8 or when the adapter shows an error.Windows
- DriverIrDA driver for Windows 8 to Windows 10, 32-bitThe 32-bit build of the same MosChip infrared driver, for older Windows installations.Windows
- Official guideIrDA on Windows 10 troubleshooting sheet (PDF)Four pages covering the single most common failure: the adapter appears in Device Manager but carries a warning. The fix is removing and re-adding the IrDA Infrared optional feature.Windows
- ManualSmartTRAK User Guide (PDF)Carries the actual infrared alignment and dive-transfer procedure plus the export formats. Still branded Uwatec AG and still lists Windows 98 through XP as requirements.Windows
- ManualGalileo Terra user manual (PDF, English)The 2007 edition, the entry model of the Galileo family.
Every link goes to Uwatec’s own site and was checked before publishing. If one has rotted since, tell us and we will fix it.
Uwatec Galileo Terra: common questions
Can I connect the Uwatec Galileo Terra to my iPhone directly?
No, and no app can change that. The Uwatec Galileo Terra transfers over infrared adapter only, a connection iOS does not expose to apps. Anyone promising a direct wireless download from this model is describing a different computer. The one-time cable route above gets every dive across.
Which cable and drivers do I need on a Mac?
Use the Uwatec interface cable made for this model, not a generic charging cable: the data pins differ. Most of these cables are USB-to-serial and need the driver for their chipset on macOS, usually Silicon Labs CP210x or FTDI. Install the driver, reboot, and the port appears to the desktop software.
Do I have to do this every time I dive?
Only if you want the new dives in digitally. Many divers do the cable run once to rescue their history, then log new dives directly in SeaLog on the boat, which takes about as long as filling in a paper page.