SeaLog
Aqualung
How to import dives from a Aqualung i770R
The Aqualung i770R exists in both a wired and a Bluetooth LE generation. Try the wireless download first, and if your unit never appears, the cable route further down brings the same dives across.
Download dives from the Aqualung i770R
- Wake the computer and put it in transfer mode
Charge or wake the Aqualung i770R and open its Bluetooth or PC/upload mode. Most models only advertise for a minute or two, so do this last, right before you pair.
Most units only hold this mode for a minute or two, so do it last, right before you connect. - Open the import hub in SeaLog
In SeaLog, tap the plus button, then Import dives, then Dive computer. Allow Bluetooth when iOS asks. SeaLog never asks for a manufacturer account.
- Pick your model and pair
Choose Aqualung i770R from the list. If iOS shows a pairing prompt, accept it. Keep the computer in transfer mode until the download finishes.
The unit only advertises for a short window. If it never appears, put it back into transfer mode and try again straight away. - Download the dives
SeaLog pulls every dive still in the computer's memory, with depth profile, water temperature, gas and surface interval, and skips the ones you already have.
- Check and keep
New dives land in your logbook ready to name, place on a site and tag with the species you saw. Nothing was retyped.
If it never shows up: the cable route
The wired generation of the i770R has no radio at all, so there is nothing to pair with. It goes through a computer once, and after that you can log straight into SeaLog on the boat.
- Install the driver for the cable
The serial cable is a USB-to-serial adapter, and its chipset needs a driver before any software can see the Aqualung i770R. Install the FTDI (FT232 virtual COM port) for the i750TC and i770R cable, and on macOS for every model; the older i100/i200/i300/i450T/i550 cable instead installs a "2002 Design, Inc. USB Download Interface Device" driver on Windows driver, then reboot. Skip this and the desktop app will report no device on a cable that is working perfectly.
FTDI CDM USB driver for Windows
These cables are USB-to-serial. Without the FTDI driver the port never appears, and the software reports no device. - Connect the Aqualung i770R to a Mac or PC
Use the serial cable made for the Aqualung i770R, not a generic charging cable: the data pins differ. Check the o-ring is seated, line the connector up with the notch on the case, and turn it to lock. An iPhone or iPad cannot open this kind of connection at all, so this step has to happen on a computer.
The o-ring must be in place, the nub lines up with the notch, then the head turns a quarter turn to lock. This cable is FTDI (FT232 virtual COM port) for the i750TC and i770R cable, and on macOS for every model; the older i100/i200/i300/i450T/i550 cable instead installs a "2002 Design, Inc. USB Download Interface Device" driver on Windows. - Put the computer into PC mode
Switch the Aqualung i770R into its PC or upload mode before you launch the software, not after. Most desktop apps only look for the unit at startup, so a computer that wakes up late is a computer the software never finds.
Most units only hold this mode for a minute or two, so do it last, right before you connect. - Download the dives with desktop software
Read the computer with DiverLog+ or Subsurface. Subsurface is free, open source, runs on macOS, Windows and Linux, and supports this model.
- Export the dives as UDDF
Export the whole logbook to a UDDF file. UDDF is the open dive-log exchange format and keeps the full depth profile, not just the summary numbers.
Export the whole logbook, not the visible page. UDDF keeps the sample-by-sample depth profile, which a summary CSV does not. - Import the file into SeaLog
Get the file to your phone. AirDrop, iCloud Drive or email all work, anything that lands it in the iOS Files app. Then in SeaLog tap the plus button, Import dives, UDDF file, and pick it. Every dive arrives with its profile, and duplicates are skipped.
A dive log app for the i770R
Once the dives are in, SeaLog treats them like its own: a scrubbable depth profile, the site pinned on a map, water temperature, gas and tank, buddies, and the photos from your camera roll matched to the minutes you were underwater. Tag the animals you saw and they go into your species life list. It works offline on the boat and syncs when you are back, and your whole logbook exports to UDDF, CSV or PDF whenever you ask, so nothing is locked in here either.
Aqualung’s own software and drivers
Half alive: the parent company collapsed into insolvency in May 2025 and was bought by HEAD in June 2025, and the mobile app survived the handover (DiverLog+ is now published by Head Watersports S.p.A. and was last updated 30 Oct 2025), but the desktop and legacy side is orphaned, with the Mac app delisted, the paid desktop versions marked Discontinued, and the classic mobile DiverLog apps pulled from both stores.
- Desktop softwareDiverLog Lite for Windows (installer)Direct 109 MB .exe and the last surviving desktop build; this is the only route left for the cable-only models.Windows
- Desktop softwareDiverLog for Windows download pageLanding page for the Windows build; it also states plainly that the paid Full edition is discontinued.Windows
- DriverFTDI CDM USB driver for WindowsSigned FTDI virtual COM port package; install it before first plugging the cable in.Windows
- DriverFTDI USB serial driver for macOS 10.14 and newermacOS uses the FTDI driver for every model; drag the app to Applications and run its Install button.macOS
- DriverFTDI USB serial driver for macOS 10.13 and olderLegacy kext installer; unsigned, so it has to be opened via right-click and then allowed in Security settings.macOS
- Official guideDownloading dives on WindowsCovers registering the computer in DiverLog and running the cable transfer.Windows
- Official guideDownloading dives with DiverLog+ over BluetoothNumbered steps for pairing, registering, pulling dives and flashing firmware from the phone.Win + Mac
- Official guideDownloading dives on macOSStill published, but the Mac application it describes is no longer distributed.macOS
Every link goes to Aqualung’s own site and was checked before publishing. If one has rotted since, tell us and we will fix it.
Aqualung i770R: common questions
Does the Aqualung i770R have Bluetooth?
It depends on the generation. This model line was sold in both a wired version and a later Bluetooth LE version, and they look almost identical. The quickest way to find out which one is on your wrist is to try the Bluetooth download first: if the computer never shows up while it is in transfer mode with a fresh battery, yours is the wired one and the cable route below is the way in.
Why will my Aqualung i770R not connect over Bluetooth?
Nine times out of ten the computer has dropped out of transfer mode: it only advertises for a short window, so put it back into Bluetooth or upload mode and try again immediately. After that, check that the battery is not low, that no other app or desktop is already holding the connection, and that Bluetooth permission is granted to SeaLog in iOS Settings. Toggling iOS Bluetooth off and on clears a stale pairing more often than it should.
Which cable and drivers do I need on a Mac?
Use the Aqualung interface cable made for this model, not a generic charging cable: the data pins differ. Most of these cables are USB-to-serial and need the driver for their chipset on macOS, usually Silicon Labs CP210x or FTDI. Install the driver, reboot, and the port appears to the desktop software.
Does the depth profile come across, or just the numbers?
The full profile. SeaLog stores the sample-by-sample depth, temperature and ascent data, draws it as a graph you can scrub, and can export the whole thing back out to UDDF at any time.